Snap Circuits 750-in-1 Manual

-84-
Project #691
OBJECTIVE: To make sounds when something is shaken.
Vibration Space War
Turn on the slide switch (S1) and shake the circuit or bang on the table,
you will hear different sounds. Try banging on the table in a regular
pattern, and see if you can make the sounds continuous.
When the vibration switch (S4) is shaken, the circuit plays out one of
eight sounds.
Project #692
OBJECTIVE: To build a lamp that stays on for a while.
Vibration Light
Turn on the slide switch (S1) and shake the base grid or bang on the
table. The lamp (L1) turns on when there is vibration, and stays on for
a few seconds.