Manual

-20-
Follow these assembly instructions, in order, using the photo on the box
cover (and the cover of this booklet) as a guide:
1. Place base grid supports on the base grid labeled A in the drawing.
2. Place parts on grid C, and install into base grid support on grid A. Note
that part of a vertical snap wire (V1) is under the white LED (D6).
3. Place parts on grid B (except the vertical snap wire that connects to
grid C, and the 2-snap and 3-snap wires that attach to it), and install
into base grid supports on grid A.
4. Finish connection of the V1 connecting between grids B-C, add the
snap wires that attach to it, and add the stabilizer between grids B & C.
5. Install remaining parts on grid A.
6. Add the projector, mirror, and Q4 attachment.
Turn on the slide switch (S1). The projector projects an image across the
room (it is best viewed in a dark room), turn its knob to select different
images. To trigger an alarm, align the mirror so light from the color LED
(D8) reaches the phototransistor (Q4); remove and re-install it in the
spring if needed. The images from the projector are rotated.