Manual

-22-
Use the preceding circuit, but
carefully replace the white LED
(D6) with the color LED (D8), or
carefully add the color LED next to
the white LED as shown here.
Project 20
Overhead Lights
Assembly (adult supervision recommended):
1. Place base grid supports on base grid A.
2. Place parts on base grids B, & D, and install into base grid supports
on grid A. The pegs should be facing inward.
3. Mount grid C on top of grids B & D using 4 stabilizers, attaching the 2
vertical snap wires (V1) as you do it.
4. Place the remaining parts on grids A & C.
Turn on the slide switch (S1) to light the white LED (D6).
Underside
view