Manual

-30-
Follow these assembly instructions, in order, using the photo on the box
cover (and the cover of this booklet) as a guide:
1. Place base grid supports on the base grid A.
2. Place parts on grid B, and install into base grid supports on grid A.
3. Place parts on grid C (except the vertical snap wire (V1) that connects
to grid B), and install into base grid support on grid A.
4. Finish connection of the V1 connecting between grids B-C, and add
the stabilizer between grids B & C.
5. Install remaining parts on grid A, note that there is a 1-snap wire on
top of the NPN transistor (Q2), on level 3.
6. Add the mirror and Q4 attachment.
Turn on the slide switch (S1), and carefully align the mirror so light from
the color LED (D8) reaches the phototransistor (Q4); an alarm will sound
when you succeed. If desired, place the projector on the white LED to
shine an image on the ceiling when the alarm sounds; it is best viewed in
a dark room.