Manual

-34-
Assembly (adult supervision highly recommended):
1. Place base grid supports on base grid A.
2. Place parts (except for the blue jumper wires) on base grids B & C,
and install into base grid supports on grid A. The pegs should be facing
inward.
3. Place remaining parts on grid A.
4. Mount grids D & E, at the angles shown and with pegs facing down,
on top of grids B & C using 6 stabilizers, and attaching 2 vertical snap
wires (V1) as you do it. Adjust the positions of the stabilizers as
needed.
5. Add the remaining parts on grids D & E.
6. Add the 2 blue jumper wires.
Turn on the slide switch (S1) to light the LEDs (D6 & D8).
Underside
view
Underside
view