Manual

Project 47 Vertical Tri-Color
Light Tunnel
Assembly:
1. Place base grid supports
on base grid B.
2. Place parts on grid A, and
install into base grid
supports on grid B.
3. Install remaining parts on
grid B.
Turn on the slide switch (S1),
all the lights in the light tunnel
(U30) are on. For best
effects, position the circuit to
shine across a dimly lit room.
Use the preceding circuit but remove one of the 2-snap wires
connecting to the light tunnel (U30).
Project 48
Vertical Dual-Color
Light Tunnel
Use the project 47 circuit but remove two of the 2-snap wires
connecting to the light tunnel (U30).
Project 49
Vertical Single-Color
Light Tunnel
-46-