Manual

Turn on the slide switch (S1). The blue LEDs in the light tunnel (U30)
are blinking, and are in sync with the color LED (D8). For best effects,
dim the room lights.
Project 63
Blinking Red
& Blue Light
Tunnel
Use the project 60 circuit, but add
a 2-snap wire across points A & B.
Use the project 60 circuit, but add
a 2-snap wire across points C & D.
Use the project 60 circuit, but
remove the 2-snap wire across
points E & F, and add 2-snap
wires across points A & B, and C
& D.
Project 60 Blinking Blue Light
Tunnel
Project 64
Blinking
Green & Blue
Light Tunnel
Project 65
Blinking Red
& Green
Light Tunnel
Project 61
Blinking Red Light
Tunnel
Use the project 60 circuit, but move the 2-snap wire from the points
marked E & F to points A & B.
Project 62
Blinking
Green Light
Tunnel
Use the project 60 circuit, but move
the 2-snap wire from the points
marked E & F to points C & D.
-50-