Manual

Turn on the slide switch (S1). The blue LEDs in the light tunnel (U30)
are blinking, but the red & green ones are not.
Use the preceding circuit, but
remove the 2-snap wire from the
points marked C & D.
Use the preceding circuit, but
move the 2-snap wire from the
points marked E & F to points C
& D.
Use the preceding circuit, but
move the 2-snap wire from the
points marked C & D to points A
& B.
Use the preceding circuit, but
move the 2-snap wire from the
points marked A & B to points C
& D.
The LEDs in the light tunnel can
be controlled individually, or
together in a preset changing
pattern.
-68-
Project 129
Red Blinking
Fun
Project 130
Red-Green
Blinking Fun
Project 131
Red-Blue
Blinking Fun
Project 132
Green-Blue
Blinking Fun
Use the preceding circuit, but
move the 2-snap wire from the
points marked C & D to points E
& F.
Project 128
Green
Blinking Fun
Project 127 Blue Blinking Fun