Manual

-76-
Project 144 Light Tunnel Tower
Assembly (adult supervision recommended):
1. Place base grid supports on base grids A & D.
2. Install base grids B & C into base grid supports on grid
A. The pegs should be facing inward.
3. Place parts on base grid E, and install into base grid
support on grid D. The pegs on grid E should be facing
forward.
4. Mount grid D (with grid E on it) on top of grids B & C
using 4 stabilizers.
5. Place the remaining parts on grid A.
6. Connect the red & black jumper wires.
Turn on the slide switch (S1) to light the light tunnel (U30).
You can use this circuit
to signal someone in the
distance.