Manual

-81-
Project 154 Color Light Box
Assembly:
1. Place battery holder (B3)
and base grid supports on
base grid A.
2. Place parts on base grids B
& D, and install into base
grid supports on grid A. The
pegs should be facing
inward.
3. Install grids C & E into base
grid supports on grid A,
attaching the 4 vertical snap
wires (V1) as you do it.
4. Place the color LED (D8) on
the battery holder.
The color LED should be on
(there is no on/off switch).
Place a blank sheet of white
paper on top of the circuit
walls, and dim the room lights.
You should see red, green,
and blue circles shining
through the paper. Remove
the color LED from the circuit
when you are finished.
Use the preceding circuit, but place the lined lens attachment on the
color LED (D8). Place a blank white sheet of paper over the circuit walls
and look at the patterns produced on it. Dim the room lights for best
effects. Remove the color LED from the circuit when you are finished.
Project 155
Color Light Box Lens