Manual

-82-
Assembly:
1. Place parts and base grid supports on base grid A, except
the red & black jumper wires.
2. Place parts on base grids B & D, and install into base grid
supports on grid A. The pegs should be facing inward.
3. Install grids C & E into base grid supports on grid A, attaching
the 4 vertical snap wires (V1) as you do it.
4. Connect the red & black jumper wires.
5. Place the projector on the white LED (D6).
Project 156 Projector Box
Turn on the slide switch (S1); the white LED should be on. Turn
the knob on the projector to select an image, which shines on
the ceiling. Now place a blank sheet of white paper on top of
the circuit walls, and dim the room lights. You should see the
projector image shining through the paper. You can select
different images on the projector if desired.