Manual

-83-
This circuit is similar to project 21, but
smaller. Assembly (adult supervision
recommended):
1. Place base grid supports on base grid A.
2. Place parts on base grids B, & D, and
install into base grid supports on grid A.
The pegs should be facing inward.
3. Mount grid C on top of grids B & D
using 4 stabilizers, attaching the 2
vertical snap wires (V1) as you do it.
4. Place the remaining parts on grids A & C.
Turn on the slide switch (S1) to light the
white LED (D6).
Use the preceding circuit, but
carefully replace the white
LED (D6) with the color LED
(D8), or carefully add the color
LED next to the white LED as
shown here.
Project 157 Mini Overhead Light
Project 158
Mini Overhead Lights