Data Sheet

-20-
Assembly (adult supervision recommended):
1. Place base grid supports on base grid A.
2. Place parts on base grids B, & D, and install into base grid supports
on grid A. The pegs should be facing inward.
3. Mount grid C on top of grids B & D using 4 stabilizers, attaching the 2
90 degree vertical snap wires (V1) as you do it.
4. Place the remaining parts on grids A & C.
Turn on the slide switch (S1) to light the 4.5 Lamp (L4).
Underside
view
LEDs are increasingly
being used for room
lighting.
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:30 PM Page 21