Data Sheet

Project 41 Disco Effects
Assembly (adult supervision recommended):
1. Place base grid supports on base grid A.
2. Place parts on base grids B, & C, and install into base grid supports on grid A. The
pegs should be facing inward.
3. Place the remaining parts on grid A.
4. Place the mirror ball on the orange motor (M9).
Turn on the slide switch (S1) to spin the mirror ball and light the LEDs (D9 and D12).
Take the circuit into a dark room for best effects.
-33-
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:30 PM Page 34