Data Sheet

-36-
Use the preceding circuit, but carefully replace the blink red LED
(D11) with the clear motor (M4) with the green fan, or replace any of
the LEDs (D9, D11, or D12) with the lamp (L4) or the melody IC
(U32, “+” on right).
Project 44
Overhead Lights & More
Assembly (adult supervision recommended):
1. Place base grid supports on base grid A.
2. Place parts on base grids B, & D, and install into base grid supports
on grid A. The pegs should be facing inward.
3. Mount grid C on top of grids B & D using 4 stabilizers, attaching the 2
vertical snap wires (V1) as you do it.
4. Place the remaining parts on grids A & C.
Turn on the slide switch (S1) to light the three LEDs.
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:31 PM Page 37