Data Sheet

-48-
Assembly:
1. Place base grid supports on base grid A.
2. Place parts base grids B & C, then install grids B, C, & D into base
grid supports on grid A. The pegs on grids C must be pointed inward.
Grid B must be the two-sided grid.
3. Mount grid E on top of grids B & D using 4 stabilizers.
4. Place the remaining parts on grid A.
Turn on the slide switch (S1) to light the LEDs (D9, D11, & D12) and
lamp (L4), and play a melody.
Use the preceding circuit, but remove the melody IC
(U32), or replace it with the clear motor (M4) and wind
fan. You can also re-arrange the lights, melody IC, or
clear motor.
Project 57 Indoor & Outdoor
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:31 PM Page 49