Data Sheet

Use any of the preceding
6 circuits, but remove the
melody IC (U32).
Project 76
Use the project 70 circuit, but add two 45
degree vertical snap wires (V2) beneath the
color2 LED (D12). Then add the reed switch
(S9) and lamp, so that the lamp will shine
towards the festive tree. The reed switch is
only used here for mechanical support, so
do not use the magnet to activate it.
Project 73
Use any of the preceding
5 circuits but replace the
fiber optic festive tree
with the egg.
Project 75
Egg House
Use the preceding 4
circuits, but replace the
lamp (L4), blue LED
(D9), or color2 LED
(D12) with the blink red
LED (D11).
Project 74
Blinking Tree
House
Use any of the preceding 7 circuits, but remove the orange
motor (M9) and mirror ball, move the melody IC (U32) to where
the orange motor was, then place the clear motor (M4) and
wind fan where the melody IC was.
Project 77 Tree House with Fan
Silent Tree
House
-55-
Highlighted Tree House
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:32 PM Page 56