Data Sheet

Assembly (adult supervision recommended):
1. Place base grid supports on base grid A.
2. Place parts on base grids B & C, and then install grids B & C into base
grid supports on grid A. The pegs must be pointed inward. Do not use
the two-sided grid.
3. Place the parts on grid A.
4. Mount the mirror ball (MB) on the orange motor (M9). Place the motor
and color Led (D12) on the grid D, then connect the both parts use two
2-snaps.
5. Mount grid D on top of grids B & C using 4 stabilizers, attaching the two
vertical snap wires (V1) as you do it.
6. Place the remaining parts on grid D.
Turn on the slide switch (S1). The blue LED and lamp shines on the
spinning mirror ball and the melody IC (U32) plays music. For best effects
place the circuit in a dark room.
-58-
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:32 PM Page 59