Data Sheet

-6-
How to Use SnapCircuits
®
The clear motor (M4) will often have the wind
fan mounted on it; simply push the fan onto the
shaft. To remove it, push up on it with a
screwdriver or your thumbs, being careful not
to break it.
This set contains three LED attachments, which
can be mounted on the LED modules (D9, D11,
and D12) to enhance their light effects. The egg
attachment is mounted directly on the LEDs, but
the fiber optic festive tree must be mounted
using the mounting base, as shown. This is
described in the projects.
In some
projects the mirror ball is placed on the orange
motor (M9).
In some projects a gear is mounted on the
orange motor using the gear insert.---
In some projects one or two components are
attached to a gear using the 3D snaps
Egg
Fiber Optic Festive
Tree
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:30 PM Page 7