Data Sheet

-86-
Pencil fan assembly instructions:
1. Take a sheet paper and cut half inch strips widthwise.
2. Folder paper strips in half as shown.
3. Take a folded paper strip and hold it vertically fold side up.
4. Insert both ends of a second paper strip between the folds of the first strip horizontally, fold
side on the right.
5. Take the third paper strip, placing it vertically between the horizontal strip to pass through the
folds.
6. Grab the loose ends from the first strip and pass it through the third strip.
7. Pull on the loose strips until the folded sides meet in the middle.
8. Adjust the middle so that all the folds are perpendicular to each other.
9. In order to change the fan direction, loosen the center by pulling on the folds. Once they are
loose, push the center in and re-tighten the fan. Now the fan should turn in the opposite
direction.
1
2
3
1
2
1
2
3
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:34 PM Page 87