Data Sheet

-88-
Project 155 Super Spotlight
Assembly:
1. Place the base grid supports on base grid A.
2. Place parts on grids B &C and install into base grid
supports on grid A.
3. Install remaining parts on grid A except the blue
jumper wire.
4. Place parts on grids D & E and install onto grids B &
C using 2 stabilizers.
5. Place remaining parts.
Turn on the slide switch (S1); the mirror ball spins and
the blue LED (D9) shines on it. For best effects place
the circuit in a dark room.
Project 156
Super Spotlight (II)
Use the preceding circuit, but replace the
orange motor (M9) and mirror ball with
the clear motor (M4) and fan, or replace
the blue LED (D9) with the color2 LED
(D12), blink red LED (D11), or lamp (L4).
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:34 PM Page 89