Data Sheet

-90-
Project 158 Mega Tower
Assembly (adult supervision recommended):
1. Place the base grid supports on base grid A.
2. Place parts on grid B (except the jumper wires) and install into base grid supports on grid A.
Note that two snap wires hang off the top of grid B.
3. Install remaining parts on grid A and connect the blue jumper wire.
4. Install grid C onto grid B using 2 stabilizers and connecting the snap wires between them.
5. Place parts on grid D. Install grid D onto grid C using 2 stabilizers and connecting the snap
wires between them.
7. Connect the red & black jumper wires. Check everything to make sure the structure is stable.
Turn on the slide switch (S1). The lights light and a melody plays.
SC-3DMEG_Manual.qxp_SC-3Di_Manual_060816 6/19/17 7:34 PM Page 91