Manual Part 2

34
Other Side
view
Assembly (adult supervision recommended):
1. Place base grid supports on base grids A & B.
2. Place parts (except for the blue jumper wires) on base grids C & D,
and install into base grid supports on grids A & B. The pegs should be
facing inward.
4. Mount grids E & F, at the angles shown and with pegs facing down,
on top of grids C & D using 6 stabilizers, and attaching 2 vertical
snap wires (V1) as you do it. Adjust the positions of the stabilizers as
needed.
5. Add the remaining parts on grids E & F.
6. Add the 2 blue jumper wires, and place the ber optic festive tree in
its holder and on the color LED (D8). Turn on the slide switch (S1) to
light the LEDs (D6 & D8) and lamp (L4).
3. Place remaining parts on grid A & B.
Turning off your computer, monitor, printer and fax machine when you are not using them saves electricity. They use electricity in stand-by or low-power mode.