User's Manual

31
Temperat. 37°C
·········| | | | |
This shows the value of temperature of the heat sink.
This shows if the PLL generating the output frequency is locked or not.
Stereo with coder ON.
This shows the frequency deviation of the carrier.
This shows the Stereo Coder position. It is possible to choose either ON or
OFF position.
This shows the Emphasis position. It is possible to choose either ON or OFF
position.
This shows the operating frequency of the MIZAR. It is possible to choose a
frequency from 87.50 MHz (87.00 for China models) to 108.00 MHz.
This shows the frequency step (minimum distance between adjacent channels).
It is possible to choose between 10kHz, 50kHz or 100 kHz.
This shows the internal AGC enabling status. It is possible to choose either
Enabled or Disabled.
This shows the AGC working status. It can be:
- Disabled;
- Low Set: AGC stopped because reference power is too low;
PLL VCO
Lock
L·········| | | | |
R·········| | | | |
Stereo Coder
OFF
Emphasis
OFF
Frequency
100.00 MHz
Deviation
·······| | | | |
Frequency Step
100 kHz
INTERNAL AGC
ENABLED
AGC STATUS
Lock