User Manual

21
LINE SOCKET
RS485
TELEMEASURES
10MHz
IN
RF OUT
10MHz
OUT
SMPTE1
ASI2 ASI1
SMPTE2
Rear panel
1
2
RS485
for Serial pin-to-pin connection
to RCU for remote control
Pin 2: RX- Pin 6: +5V
Pin 3: RX+ Pin 7: TX-
Pin 4: +5V Pin 8: TX+
Pin 5: GND
Wired Telemeasures connector
Pin 1: FWD power (Analog out)
Pin 2: REF power (Analog out)
Pin 3: Temperature (Analog out)
Pin 4: FWD power (Analog in)
Pin 5: GND
Pin 6-7: Alarm or Squelch (user selectable)
Alarm: Open=Normal / Closed=Alarm
Squelch: Open=No Squelch / Closed=Squelch
(Digital out, Free contact relay)
Pin 8: External AGC Alarm (Digital in)
Open=Normal / GND=Alarm
Pin 9: Remote ON/OFF (Digital in)
Open=ON / GND=OFF
8
3
4
5
6
7
DESCRIPTION
1 Main Switch
2 AC Socket with Fuse-Holder (2A)
3 RS485 Socket
4 Telemeasures Connector
5
TS Input Connectors
- ASI1 Input
- ASI2 Input
- SMPTE1 Input
- SMPTE2 Input
6 10MHz OUT Connector
7 10MHz IN Connector
8 RF Output Connector