User's Manual Part 2

93
When the equipment is put within a combined system it is directly connected to the input splitting and output
combining systems.
Before fully powering the equipment, check that the output connections of the coaxial cable to the antenna
system are working.
In order to this it is possible to check the indication of the Reflected Power at low power levels. Only if the
SWR indication on the display is 0, the output power can be slowly increased. At maximum output power,
some watts might be shown as Reflected Power.
2.3 CONNECTION WITH VEGA TV TRANSMITTER
AGC
1
2
8
5
8
4
TV AMPLIFIER VEGA
BREAKER
AC 200V OUT
RS485 TELEMEASURES
AC 400V IN
RF OUT
RF IN
To ELECTRIC NETWORK
To ANT E N N A