User Manual

41
important parameters are also shown in this screen. Pressing the knob while in this menu you will be directed
to the RF Power menu for a quick intervention during emergency situations.
3.3.1 TITLE BAR
On the top of the display, the title bar is shown. It is always visible during browsing the various menus and
screens. In the bar two pieces of information are present.
• The name of the screen is displayed on the left (DIAGRAM in the case of the first screen). During settings
change, a confirmation question could appear in this part of the titlebar (see later).
• The actual time is on the right side of the bar. The colon symbol between hours and minutes blinks every
second in order to indicate the progress of time.
3.3.2 STATUS BAR
On the bottom of the display, the status bar is shown. It is always visible while browsing the various menus and
screens. In the bar five pieces of information are present, as described in the following list (the order is from
the left to the right of the bar).
• The bell icon ( ) on the left gives the user some information about alarm conditions that are present or that
occurred in the past. The icon can be absent, present or blinking. The meanings of these conditions are
detailed in the following table.
ICON DESCRIPTION
Absent
No alarms are present and no alarms occurred since the last visit to the log
Present
At least an alarm is present at the moment
Blinking
An alarm occurred since the last visit to the log, but no alarm is present at this moment
• The lock icon ( ) at the right of the bell icon is displayed when the control is password-locked (see later in
this manual for more information about password locking). When the user unlocks it by typing the correct
password, the lock icon disappears.