User Manual

- CONFIGURATION submenu

Input (ASI1, ASI2, ASI Auto, SMPTE1, SMPTE2, SMPTE Auto)

This parameter lets to change the input type (ASI or SMPTE) and the stream (1 or 2) used

by the modulator. It's also possible to set the automatic selection mode (see TS INPUT

MANAGEMENT paragraph for more information).

Smart Switching

Click on this item to enter Smart Switching submenu.

VCT

Click on this item to enter VCT submenu.

ASI1 sync (Present, Absent)

If a valid ASI1 input is detected by the modulator, the word Present is written. On the

contrary, if no ASI1 input is detected by the modulator, the word Absent is written.

ASI2 sync (Present, Absent)

If a valid ASI2 input is detected by the modulator, the word Present is written. On the

contrary, if no ASI2 input is detected by the modulator, the word Absent is written.

SMPTE1 sync (Present, Absent)

If a valid SMPTE1 input is detected by the modulator, the word Present is written. On the

contrary, if no SMPTE1 input is detected by the modulator, the word Absent is written.

SMPTE2 sync (Present, Absent)

If a valid SMPTE2 input is detected by the modulator, the word Present is written. On the

contrary, if no SMPTE1 input is detected by the modulator, the word Absent is written.