User Manual

60
Control
Click on this item to enter the Control submenu to configure the remote control and the
password locking.
Log Clear
This is an “action parameter” and it is used to clear the log content. Be sure to read the
latest events before clearing the log. After clearing, it isn’t possible to undelete the events.
Factory Settings
During the test phase of the machine, most of all parameters and adjustments are well
defined and saved in a non-volatile memory. The user can retrieve and load this configuration
by clicking on Factory Settings item menu. Note that after loading the factory settings,
many parameters are changed simultaneously at one time. Please, use this feature with
care.
Display
Click on this item to enter the Display submenu to read and/or modify the backlight and
contrast of the LCD.
Clock
Click on this item to enter the Clock submenu to read and/or change the actual time.
Power Supply
Click on this item to enter the Power Supply submenu to monitor the power supply voltages
status.
Versions
Click on this item to enter the Versions submenu to read all the firmware versions.
3.4.4 SETUP MENU