User Manual

63
- POWER SUPPLY submenu
+5V
This read-only parameter shows the +5V power supply voltage monitored by a voltage
sensor. If this voltage is outside a reasonable range, an alarm occurs and the value starts
blinking on the display (see the Alarms and automation paragraph for more
information).
+12V
This read-only parameter shows the +12V power supply voltage monitored by a voltage
sensor. If this voltage is outside a reasonable range, an alarm occurs and the value starts
blinking on the display (see the Alarms and automation paragraph for more
information).
-12V
This read-only parameter shows the -12V power supply voltage monitored by a voltage
sensor. If this voltage is outside a reasonable range, an alarm occurs and the value starts
blinking on the display (see the Alarms and automation paragraph for more
information).
- VERSIONS submenu
Control
This is the control system version of the ATSC TRANSMITTER. It is composed by two
numbers separated by a dot. Please, indicate this and other versions in the Versions menu
to the technical support in order to simplify the problem solving.
Modulator HW
This is the ATSC Modulator module hardware version. It is composed by two numbers
separated by a dot.
Please, indicate this and other versions in the Versions menu to the technical support in
order to simplify the problem solving.
Modulator SW
This is the ATSC Modulator module software version. It is composed by two numbers
separated by a dot.
Please, indicate this and other versions in the Versions menu to the technical support in
order to simplify the problem solving.