User's Manual Part 1

15
1.3 TECHNICAL CHARACTERISTICS
VIDEO PARAMETERS
Input impedance 75W
Input level 1Vpp ±6dB
White / Sync level limiter 95%
2T K factor < 1.5%
Amplitude / frequency response ±0.5dB (throughout the vision band)
Differential gain < 5%
Differential phase < 3°
Group delay ±35ns (throughout the vision band)
Sync pulse compression < 3%
S/N ratio (weighted) > 60dB
Pre-emphasis 50ms or 75ms or flat
ICPM < 3°
Luminance non linearity < 4%
Field time bar tilt < 2%
Line time bar tilt < 2%
AUDIO PARAMETERS
Input impedance 600W or 10k, selectable
Input level 0dBm ±8dB, 0.5dB step
Frequency response (30Hz to 15kHz) ±0.5dB (±0.2 typ.)
T.H.D. (30Hz to 15kHz) < 0.4% (better then 0.2% typ.)
S/N ratio (unweighted) > 60dB
Pre-emphasis 50ms or flat
Stereo / Dual sound operation Available
Stereo Crosstalk > 37dB (better then 40dB typ.)
GENERAL
Ouput power 0 to 15W (Adj.)
Available standards B, D, G, H, I, K, M, N
Cooling Conventional
Operating temperature -10°C to +45°C
Maximum relative humidity 90%, non condensing
Mains power supply 90 to 260VAC
External reference frequency input 5MHz or 10MHz
Output impedance 50W
Output connector N Female
Dimensions 3U 19 Rackmount
Weight 15kg
Frequency stability 1ppm
I.M.D. at rated output power Better than -60dBc (-63dBc typical)
Harmonics -60dB or better
Sporious emissions -60dB or better
External interfaces Logic and analog signal outputs,
enable input, RS485, RS232
Specifications and characteristics are subject to change without notice.