User's Manual Part 1

21
All of the menus of the VEGA contain a top bar which shows the name of the apparatus, the firmware version
of the display board and the current time, and a bottom bar showing the reading of the output forward and
reflected power and a summary of the current menu.
Since the number of menus of the VEGA is high, we give hereby a detailed description of all menus.
Note that the same firmware works either with the mono audio modulator and the stereo one. The firmware
only needs to be set to mono or stereo from the relevant menu. Depending on the selection, the look of some
menus may vary.
From the default menu, the bar meters menu, the user can navigate to other 2 menus. To navigate the menus,
rotate the knob. The presence of a menu on the left or the right of the current one is shown as arrows at the left
or the right respectively.
To enter the menu of the individual modules, select the module from the menu with the graphical image of
VEGA, both the rear and the front view. After clicking, a blinking arc will show in what module you can enter
clicking on the knob. To change module, rotate the knob.
Below are listed all the menus of all modules. Some symbols and functioning are always the same, and are:
l The EXIT menu is always on the first position of the leftmost menu and sends back to the default menu
containing the deviation bars. So to go back to the default menu you have always to go all menus left and click
2 times, the first for selection and the second for confirmation.
l The parameters may be represented in different ways depending on their type. In detail:
- the read-only parameters are represented by the name of the parameter and its current value. In case of
failure of a parameter, its value blinks;
- the parameter which can be set within a range of values are represented by the name of the parameter and
its set value, followed by an arrow pointing downward to show that the value is part of a list of possible