User's Manual Part 1

30
Sync Restore
Clicking on then knob, after selecting this voice, goes into the menu that allows to toggle
the sync restore intervention. Rotate the knob to select the desired value and click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Source
Clicking on then knob, after selecting this voice, goes into the menu that allows to choose
whether to sample the input signal from the front or rear panel. Rotate the knob to select
the desired value and click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Video
Shows the PLL lock or unlock of the video. In case of unlock, the label blinks.
Video Level
Clicking on then knob, after selecting this voice, goes into the menu that allows to sets the
video level. Rotate the knob to select the desired value and click on it.
The actual level is represented by the empty arrow, the full arrow represent the value of
the factory setting of this level. This 'factory default marker' can help you to set-up the exciter to a good value,
without ant instrumentation.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.