User's Manual Part 1

35
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
DRO, VCO, STD
Shows the oscillator PLLs lock or unlock. In case of unlock, the label blinks.
Output
Clicking on then knob, after selecting this voice, goes into the menu that allows to toggle
the oscillator output. Rotate the knob to select the desired value and click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Ref
Clicking on then knob, after selecting this voice, goes into the menu that allows to select
whether the reference is internal or external . Rotate the knob to select the desired value
and click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.