User's Manual Part 1

40
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Brightness
Clicking on then knob, after selecting this voice, goes into the menu that allows to adjust
the brightness settings of the display. Rotate the knob to select the desired value and
click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Serial
Clicking on then knob, after selecting this voice, goes into the menu that allows to toggle
between the possibility for serial port control: RS232 on the front panel and RS485 on
the rear panel. Rotate the knob to select the desired value and click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Factory Def
Clicking on then knob, after selecting this voice, goes into the menu that allows to reste all
of the parameters of the VEGA to values set during the factory tests.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the knob.
Date
Clicking on then knob, after selecting this voice, goes into the menu that allows to set the
date of the internal clock of the display board.
Rotate the knob to select the desired value and click on it, the selection will go to the next
filed.
The date format is day/month/year.