User's Manual Part 1

41
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Time
Clicking on then knob, after selecting this voice, goes into the menu that allows to set the
time of the internal clock of the display board. Rotate the knob to select the desired value
and click on it, the selection will go to the next filed.
The time format is hour/minute/second.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Std
Clicking on then knob, after selecting this voice, goes into the menu that allows to set the
standard used. Rotate the knob to select the desired value and click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Signal
Clicking on then knob, after selecting this voice, goes into the menu that allows to select
the signal type handled by the VEGA. Rotate the knob to select the desired value and
click on it.
If 'Digital' signal type is selected the sync detection is disabled. In the same way is disabled the 3dB power
reduction feature in case of AGC power control and Sync lost.
In case of Digital signal type selection the sync icon in the top bar will be replaced by a 'DIG' icon.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.