User's Manual Part 1

42
TLMout
Clicking on then knob, after selecting this voice, goes into the menu that allows to toggles
between Squelch or Alarm meaning of the output free contact of the Telemeasure
connector. Rotate the knob to select the desired value and click on it.
Answer to the confirming question, selecting between accept or not. The answer starts
always from "Accept: NO", so to exit quickly form this menu simply click 2 times on the
knob.
Config
Clicking on then knob, after selecting this voice, goes into the menu that allows to go in
the Configuration menu of VEGA to change the VEGA boards topology. This possibility
is enabled only in Factory Setting mode. Answer to the confirming question, selecting
between accept or not. The answer starts always from Accept: NO, so to exit quickly
form this menu simply click 2 times on the knob.
Releases
Clicking on then knob, after selecting this voice, goes into the menu that allows to view
all the release history of all the microcontrollers around the VEGA boards. The display
board is showed in the first line and then the audio, video, local oscillator and external
reference.