User's Manual Part 3

118
Fig. 4
7. It is possible to note that, by tuning the notch attenuation as described in point 6 above, the adaptation has
moved. It can be adjusted by acting on the filter as per point 6, correcting each time the tuning of the notch
attenuation by means of the coupling 5, until a frequency response like the one in the example (Fig. 5) is
obtained.
Fig. 5
8. Once the calibration is complete, the mechanical movement during the locking stage will have to be
compensated for, because a variation of the adaptation may occur. It only takes to extract slightly the tuning
which is being fastened.