Instructions / Assembly

Page 3Rev. 031820
1-888-651-3431
Step 1. Insert the right xed seat (2) and the left xed seat (3) into the frame (1). Install the M12x30
hexagonal bolts (6) with spring washers (7) and at washers (8) through the long holes of the frame
into the left and right xed seat threaded holes. See Fig. 1. Note: Do not fully tighten hardware yet.
Step 2. Place the assembly on the pickup truck, then adjust to the appropriate size for your truck.
Tighten the M12x30 bolts (6) to lock in place. Install an M12x75 hexagonal bolt (9) with spring washer
(7) and at washer (8) through the long hole in the xed seat and the truck bed stake pocket hole. Se-
cure with the U-shaped mounting plate (4). Repeat on the other side, tightening securely. See Fig. 2.
Assembly and Installation