User's Manual

User manual
1． Functionalschematicdiagram （THREEMOTORS）
1. Description of Power
Host is equipped with Switching power supply（DC12V、1.25A）.This
machine is the maximum current not more than 1.2A when the rated load
weight.When current more than 1.2A : Buzzer will alarm in the host,
and one second later ,SCM detect
the fault andthen disconnect motor power automatically to protect the
Host.
2. Instructions
1) Turn on the power, the TV Mount will turn back to midpoint
automatically,then contraction, return and turn off.
2) Press the button “OPEN” on the remote, the TV Mount will extend and
stop.
3) Press the button “LEFT,RIGHT,DOWN” to adjust the angle that you
want.
4) Hold the button “MEMORY” long time and adjust the angle you want,
then press the button “MEMORY” again, the red light turn off and
this angle is saved.
5) Press the button “OPEN” again, the TV Mount will turn back to
midpoint automatically, then contraction, return and turn off; if
you want to turn on again, press the button “MEMORY” only, then the
TV Mount will restore the angle that you saved before turn off.