Warranty

Thank you for purchasing the DOME Siren, a
device that works with your Z-Wave Certified
Controller to alert you with sounds and built-in
LED’s to security threats and problems such as
leaks and fires. It can also sound a mild chime
when doors or windows open to let you know
when people come and go.
QR Code
LED Ring
Figure 1 - Siren Front
Opening the Siren:
1. Twist the back plate clockwise (to the right.)
2. Pry off the Back Plate.
Back Plate
Figure 2 - Removing the Back Plate
Including/Connecting into the Z-Wave Network:
Follow the instructions for your Z-Wave certified Controller
to enter inclusion mode.
When prompted by the Controller:
1. For proper inclusion, bring the Siren to within 10 feet
of your Controller. After inclusion, the device can be
moved to any desired location.
2. Remove the Back Plate of the Siren.
3. Remove the Battery Tabs.
4. Press the Connect Button quickly 3 times in a row.
The LED Ring will flash five times indicating inclusion.
Battery Tab
Connect Button
Figure 3 - Inside the Siren
Excluding/Disconnecting from the Z-Wave
Network:
Follow the instructions for your Z-Wave certified
Controller to enter exclusion mode.
When prompted by the Controller:
1. Remove the Back Plate of the Siren.
2. Press the Connect Button quickly 3 times in
a row.
The LED Ring will flash five times indicating
exclusion/disconnection.
Siren