Use and Care Manual
Page 7
Water Main Shut-Off Advanced User Manual
Inclusion & Exclusion
Inclusion
Follow the instructions for your Z-Wave Certified Conto enter inclusion mode.
When prompted by the controller:
1. Plug the Water Main Shut-Off into an outlet 10’ from your controller. You can
bring it to your desired location after the inclusion process. If successfully
powered up, the LED INDICATOR will keep blinking until the device is includ-
ed in a system.
2. Press the OPEN/CLOSE BUTTON quickly 3 times in a row.
3. The LED INDICATOR will stop blinking and stay on continuously after inclu-
sion.
Exclusion
Follow the instructions for your Z-Wave Certified Conto enter exlusion mode.
When prompted by the controller:
1. Press the OPEN/CLOSE BUTTON quickly 3 times in a row.
2. The LED INDICATOR will start blinking after successful exclusion.
CAUTION
Upon inclusion, the motor will engage and start turning automatically. To avoid serious injury, keep your
fingers and hands clear of the CONTROL ARM and its path, only gripping the unit firmly by either the
MOUNTING BRACKET or the top of the MOTOR ASSEMBLY
Inclusion & Exclusion