Manualshelf

Use and Care Manual

ManualsBrandsElexnux ManualsFans24 in. 3 Speeds High Velocity Internal Oscillating Barrel Floor Fan in Yellow with Powerful 1/4 Motor
1234
ADJUSTING INTERNAL ORBITAL OSCILLATION FEATURE
The internal orbital oscillation feature can be turned on by rotating the switch
knob to the side sticked “Orbital Oscillation”.To disengage the oscillation feature,
turn the switch knob to the side sticked “Orbital Oscillation Off”.
4. TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired
angle. Rotating the fan head upward serves to pull air from the floor and
circulate it throughout the entire room.
Adjust the desired speed by rotating the switch knob
0 Stop 1 Low 2 Medium 3 High
Orbital Oscillation Off Orbital Oscillation
3
2
1
0
1
2
3
This fan is completely assembled upon delivery- no assembly required.
1. Place the fan on a safe, flat surface where it can fall or be pulled by the cord.
2. ADJUSTING AIR SPEED
Unplug the appliance before celaning.Don't use any water for celaning metal
surfaces.Slightly moisten a cloth and the wipe off the surfaces of the fan.In order
to remove the dust from the grill,use a vacuum cleaner or remove the front grill
by removing the securing screws on the edge of the grill.After cleaning, remount
the grill.After doing this,fasten the screws on the edge of the grill.