Use and Care Manual

1. Place the fan on a safe, flat surface where it can not fall or be pulled by the

cord.

2. Loosen the adjustment knobs (C) on each side of the fan by turning

counterclockwiseand tilt the fan head (A) to the desired angle. Tighten the

adjustment knobs(C) by turning them clockwise. WARNING: Do not move or

adjust fan while in operation.

3. Plug the power cord into electrical outlet.

4. Select preferred speed by rotating the switch on the back of fan.

Please choose low speed for lower noise, high speed for large air volume.

5. Always turn off (0-Off) and unplug fan after using.

Unplug the appliance before celaning.Don't use any water for celaning metal

surfaces.Slightly moisten a cloth and the wipe off the surfaces of the fan.In order

to remove the dust from the grill,use a vacuum cleaner or remove the front grill

by removing the securing screws on the edge of the grill.After cleaning, remount

the grill.After doing this,fasten the screws on the edge of the grill.

OPERATION INSTRUCTIONS

CARE AND MAINTENANCE

0 - Stop ||| - High || - Medium | - Low