Specifications

SW 5550AE • SW 3700AE • SW 1850AE Operation
Operation Manual 3-35
15. To retain the waveshape and display it on Phase A of the oscilloscope:
a. Return to the MAIN MENU by pressing <Menu> twice.
b. Select the PROGRAM Menu, then press <Enter>.
PROGRAM
MEASURE
WAVEFORM
SEQUENCE
INSTR
SYSTEM
PHASE A
AMPL 120.00 V
CURL 5.00 A
FREQ 60.00 Hz
ANG 0.00 Deg
FUNC SCRATCH
MAIN MENU OUTPUT [OFF]

16. In the PHASE A sub-menu:
a. Select FUNC with the Knob, then press <Enter> to place a box around the
waveshape selection.
b. Rotate the Knob until SCRATCH is displayed, then press <Enter>. The
scratchpad waveform will now be displayed on Phase A of the oscilloscope.
17. Press <Menu> or the Left Arrow key to return to the MAIN MENU.