Operating instructions

SW 5250A•SW 3500A•SW 1750A Operation
Operation Manual 3-13
 !0= %!
The WAVEFORM menu allows you to assign a name to a new waveform and SAVE it
from the scratchpad to non-volatile memory.
1. Use the Up/Down Arrow keys or the Knob to enter the custom waveform name.
Press the Right Arrow key to proceed to the next character; press the Left
Arrow key to backspace. The last character must be “–”.
2. Press the Enter key.
3. Go to SAVE or SAVE RMS and press the Enter key to save.
LOAD
EDIT
VIEW
SAVE
DELETE
NAME –
SAVE
SAVE RMS
WAVEFORM OUTPUT [OFF]

SAVE Sub-Menu Status and Information Data:
Menu Item Status and Information Line
NAME [–
>
= next char,
<
– = backsp]
SAVE [save waveform to library]
The waveform is saved and scaled in scratch memory
without regard to the calculated RMS value.
SAVE RMS [save waveform to library]
The waveform is scaled so that the calculated RMS
value of the entire waveform is equal to the value of
the Vrms field in the WAVEFORM EDIT menu.