Operating instructions

Operation SW 5250A•SW 3500A•SW 1750A
3-14 Operation Manual
- !0= %!
The WAVEFORM menu allows you to DELETE a waveform stored in non-volatile
memory.
ALL USER WAVEFORMS - Erases the 50 user waveform locations in non-volatile
RAM. Any user waveforms currently running will not be deleted.
INITIALIZE MEMORY - Resets the waveform library to the factory settings. All factory
waveforms will be restored and all user waveforms stored in non-volatile RAM will be
erased. You must cycle power to the unit after this function for the changes to take
effect.
 Under normal operating conditions this function is not required.
Instead, use “Delete–All User Waveforms.”
LOAD
EDIT
VIEW
SAVE
DELETE
FUNC
ALL USER WAVEFORMS
INITIALIZE MEMORY
Name
WAVEFORM OUTPUT [OFF]

Press key to
toggle custom waveforms
Right Arrow
DELETE Sub-Menu Status and Information Data:
Menu Item Status and Information Line
FUNC [<enter> to select waveform]
ALL USER WAVEFORMS [<enter> for all user waveforms]
INITIALIZE MEMORY [Resets to factory defaults]
 If you attempt to delete a waveform in Flash Memory,
the message “! - STANDARD WAVEFORM” will appear.