Operating instructions

SW 5250A•SW 3500A•SW 1750A Operation
Operation Manual 3-39
10. Select START . Enter 30 using the keypad, then press < Enter > to set the
starting phase angle to 30°.
11. Select STOP . Enter 50 using the keypad for an ending phase angle of 50°, then
press < Enter >. Note that the instrument automatically calculates the TIME (in
this case, 0.93 ms).
12. Select AMPL . Enter 220.6 , then press < Enter > to set the amplitude to 220.6V.
13. Press < Menu > to return to the WAVEFORM Menu.
LOAD
EDIT
VIEW
SAVE
DELETE
WAVEFORM OUTPUT [OFF]

14. Select VIEW to view the scratchpad, then press < Enter >. A waveshape similar
to the one illustrated below should be displayed on the scratchpad.
2
2
1
2
2
1
0
90 180 270
WAVEFORM OUTPUT [OFF]