Operating instructions

Operation SW 5250A•SW 3500A•SW 1750A
3-42 Operation Manual
LOAD
EDIT
VIEW
SAVE
DELETE
WAVEFORM OUTPUT [OFF]

FUNC Sine
Displays library of waveforms
6. Press < Enter > to load the sine waveshape into scratchpad memory. The
message, [waveform successfully loaded], will indicate that the waveform is now
in scratchpad memory.
7. Press < Menu > to return to the WAVEFORM Menu.
8. Use either the Knob or the Up/Down Arrow keys to select the EDIT sub-menu,
then either press < Enter > or the Right Arrow key. The EDIT menu will be
displayed.
LOAD
EDIT
VIEW
SAVE
DELETE
FREQ Hz
Vrms V
START Deg
TIME ms
STOP Deg
AMPL V
WAVEFORM OUTPUT [OFF]

60.00
120.00
45.00
1.00
66.60
10.00
9. Select Vrms . Enter 120 , then press < Enter > to set the RMS voltage to 120
volts.