Operating instructions

SW 5250A•SW 3500A•SW 1750A Operation
Operation Manual 3-43
10. Select START . Using the keypad, enter 45 , then press < Enter > to set the
starting phase angle to 45°.
11. Select TIME , enter 1 for a duration of 1 millisecond, then press < Enter >. Note
that the instrument automatically calculates the STOP phase angle value (in this
case, 66.6°).
12. Select AMPL , enter 10 for 10 volts, then press < Enter >.
13. Press < Menu > to return to the WAVEFORM Menu.
LOAD
EDIT
VIEW
SAVE
DELETE
WAVEFORM OUTPUT [OFF]

14. Select VIEW to view the scratchpad, then press < Enter >. A waveshape similar
to the one illustrated below should be displayed on the scratchpad.
2
2
1
2
2
1
0
90 180 270
WAVEFORM OUTPUT [OFF]